512Mb: 32 Meg x 16, 16 Meg x 32 Mobile SDRAM
SELF REFRESH Operation
SELF REFRESH Operation
The self refresh mode can be used to retain data in the device, even when the rest of the
system is powered down. When in self refresh mode, the device retains data without ex-
ternal clocking. The SELF REFRESH command is initiated like an AUTO REFRESH com-
mand, except CKE is disabled (LOW). After the SELF REFRESH command is registered,
all the inputs to the device become “Don’t Care” with the exception of CKE, which must
remain LOW.
After self refresh mode is engaged, the device provides its own internal clocking, ena-
bling it to perform its own AUTO REFRESH cycles. The device must remain in self re-
fresh mode for a minimum period equal to t RAS and remains in self refresh mode for an
indefinite period beyond that.
The procedure for exiting self refresh requires a sequence of commands. First, CLK
must be stable prior to CKE going back HIGH. (Stable clock is defined as a signal cycling
within timing constraints specified for the clock ball.) After CKE is HIGH, the device
must have NOP commands issued for a minimum of two clocks for t XSR because time is
required for the completion of any internal refresh in progress.
Upon exiting the self refresh mode, AUTO REFRESH commands must be issued accord-
ing to the distributed refresh rate ( t REF/refresh row count) as both SELF REFRESH and
AUTO REFRESH utilize the row refresh counter.
PDF: 09005aef8459c827
512mb_mobile_sdram_y67m_at.pdf – Rev. B 3/11 EN
78
Micron Technology, Inc. reserves the right to change products or specifications without notice.
? 2011 Micron Technology, Inc. All rights reserved.
相关PDF资料
MT48H8M16LFB4-75 IT:K TR IC SDRAM 128MBIT 133MHZ 54VFBGA
MTC100-JA2-P34 CONTACT INSERT PIN
MX841BE IC CONVERTER WHITE LED 8-SOIC
MXHV9910BTR IC LED DRIVER HIGH BRIGHT 8-SOIC
MXN12FB12F MOTOR BRUSHED DC 12V 2922RPM
MXN13FB08B1 MOTOR BRUSHED DC 8V 4714RPM
N01L63W2AB25I IC SRAM ASYNC 1MBIT ULP 48-BGA
N01L63W3AB25I IC SRAM 1MBIT 3V LP 48-BGA
相关代理商/技术参数